12
13
Please select a LUN to present to the initiator ('q' to quit): 12
All attribute values that have been changed will now be saved.
MEZ50 (admin) #> lunmask rm
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:38
1 50:01:43:80:02:5d:a5:30,50:01:43:80:02:5d:a5:3c
Please select a Target from the list above ('q' to quit): 0
LUN
----
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Please select a LUN presented to the initiator ('q' to quit): 12
Index Initiator
----- -----------------
0 iqn.1991-05.com.microsoft:perf3.sanbox.com
Please select an Initiator to remove ('a' to remove all, 'q' to quit): 0
All attribute values that have been changed will now be saved.
Example 2: The following shows an example of the lunmask add command with virtual port
groups.
MEZ75 (admin) #> lunmask add
Index Type Mapped (WWNN,WWPN/iSCSI Name)
----- ---- ------ ----------------------
0 FCOE Yes 20:00:00:c0:dd:10:f7:0d,21:00:00:c0:dd:10:f7:0d
1 FCOE Yes 20:00:00:c0:dd:10:f7:0f,21:00:00:c0:dd:10:f7:0f
2 FCOE No 20:00:00:c0:dd:18:dc:53,21:00:00:c0:dd:18:dc:53
3 FCOE No 20:00:00:c0:dd:18:dc:54,21:00:00:c0:dd:18:dc:54
4 FCOE No 20:00:00:c0:dd:18:dc:5d,21:00:00:c0:dd:18:dc:5d
5 FCOE No 20:00:00:c0:dd:18:dc:5e,21:00:00:c0:dd:18:dc:5e
6 FCOE Yes 20:00:00:00:c9:95:b5:77,10:00:00:00:c9:95:b5:77
7 FCOE Yes 20:00:00:00:c9:95:b5:73,10:00:00:00:c9:95:b5:73
8 FCOE No 20:00:f4:ce:46:fb:0a:4b,21:00:f4:ce:46:fb:0a:4b
9 FCOE Yes 20:00:f4:ce:46:fe:62:69,10:00:f4:ce:46:fe:62:69
10 FCOE Yes 20:00:f4:ce:46:fe:62:6d,10:00:f4:ce:46:fe:62:6d
11 FCOE No 20:00:f4:ce:46:fb:0a:4c,21:00:f4:ce:46:fb:0a:4c
Please select an Initiator from the list above ('q' to quit): 10
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
2 VPGROUP_2
208 Command reference
To Next Page
Loading...
Need help?
General
