HP EVA P6000 User Manual

Table 31 iSCSI or iSCSI/FCoE module log messages (continued)
Left PCM is not connected to AC power
(unplugged).
InfoUsersysTempMon: Power for Left
PCM Un-plugged
152134
Right PCM is connected AC power.InfoUsersysTempMon: Power for Right
PCM Plugged-in
152135
Right PCM is not connected to AC power
(unplugged).
InfoUsersysTempMon: Power for Right
PCM Un-plugged
152136
Left PCM (#1) is reporting a faulty fan.InfoUsersysTempMon: Slot 1 (R1) PCM
Fan%d faulty
152137
Left PCM (#1) is reporting a healthy fan.InfoUsersysTempMon: Slot 2 (R2) PCM
Fan%d faulty
152138
Right PCM (#2) is reporting a faulty fan.InfoUsersysTempMon: Slot 1 (R1) PCM
Fan%d healthy
152139
Right PCM (#2) is reporting a healthy fan.InfoUsersysTempMon: Slot 2 (R2) PCM
Fan%d healthy
152140
Module has detected an over temperature, Front:
%dC Rear: %dC CPU1: %dC CPU2: %dC.
InfoUsersysTempMon: Over Temperature
Front: %dC Rear: %dC CPU1:
%dC CPU2: %dC
152141
Fan(s) speed has been set to high.InfoUsersysTempMon: Setting the fan
speed to high
152142
Fan(s) speed has been set to normal.InfoUsersysTempMon: Setting the fan
speed to normal
152143
Module temperature has returned to normal
operating range, Front: %dC Rear: %dC CPU1: %dC
CPU2: %dC.
InfoUsersysTempMon: Temperature back
to safe value. Front: %dC
Rear: %dC CPU1: %dC CPU2:
%dC
152144
Module has reached a critical temperature ad is
shutting down, Front: %dC Rear: %dC CPU1: %dC
CPU2: %dC.
InfoUsersysTempMon: Critical
Temperature, Shutting Down
Front: %dC Rear: %dC CPU1:
%dC CPU2: %dC
152145
A GE port (eth#%d) has invalid NVRAM
parameters.
FatalTOEQL3022:ql3xxx_probe: Adapter
eth#%d, Invalid NVRAM
parameters
200721
Uncorrectable memory error detected at address
provided in log message.
FatalSystem"memory monitor: Detected
Uncorrectable Ecc %08lx
233473
system is rebooting in 5
secs\n"
Attempt to register the interrupt handler failed.FatalSystem"Failed to register
interrupt handler!\n"
233474
Failed class_simple_create system call from
memory monitor initialization routine.
FatalSystem"%s class_simple_create
failed\n"
233475
Failed to kill system task.ErrorSystem"Failed to kill sys killer
%d\n"
237572
Module temperature has exceeded the high
temperature threshold.
ErrorSystemTemperature over high
threshold %d
237573
Module temperature has returned to the normal
operating range.
InfoSystemTemperature is back to
normal range %d
249862
279

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers