HP EVA P6000 User Manual

1. Check the box for Multipath I/O in the Add Features page (Figure 32 (page 90)).
Figure 32 Add Features page
2. Click Next and then click Install.
3. After the server reboots, add support for iSCSI Devices using the MPIO applet (see
Figure 33 (page 90) and Figure 34 (page 91)).
NOTE: You must present a virtual disk to the initiator to enable the Add support for iSCSI
devices checkbox.
Figure 33 MPIO Properties page before reboot
90 iSCSI or iSCSI/FCoE configuration rules and guidelines

HP EVA P6000 Specifications

General

Model	HP EVA P6000
Number of Storage Controllers	2
Management Software	HP Command View EVA
Drive Types	SAS, SSD
RAID Levels	RAID 0, 1, 5, 6
Connectivity	8 Gb Fibre Channel, 10 Gb iSCSI, 1 Gb iSCSI
Form Factor	Rack-mounted
Storage Controller Type	Dual controllers