HP ProCurve 6400cl Series - Command Syntax Statements; Getting Started; Conventions; Overview

Getting Started
Overview
Overview
This Advanced Traffic Management Guide is intended for use with the
following switches:
■ HP ProCurve Switch 10G CX4
6400cl-6xg
■ HP ProCurve Switch 10G X2
6400cl-6xg
■ HP ProCurve Switch 5304xl ■ HP ProCurve Switch 5348xl
■ HP ProCurve Switch 5308xl ■ HP ProCurve Switch 5372xl
■ HP ProCurve Switch 3400cl-24G ■ HP ProCurve Switch 3400cl-48G
This guide describes how to configure and use the advanced traffic manage-
ment features covered in the following chapters. The Product Documentation
CD-ROM shipped with the switch includes a copy of this guide. You can also
download the latest version of this guide from the HP ProCurve website.
(Refer to
“Getting Documentation From the Web” on page 1-6.)
For information on other product documentation available for the above-
listed switches, refer to
“Related Publications” on page 1-4.
Conventions
This guide uses the following conventions for command syntax and displayed
information.
Command Syntax Statements
Syntax: aaa port-access authenticator < port-list >
[ control < authorized | auto | unauthorized >]
■ Vertical bars ( | ) separate alternative, mutually exclusive elements.
■ Square brackets ( [ ] ) indicate optional elements.
■ Braces ( < > ) enclose required elements.
■ Braces within square brackets ( [ < > ] ) indicate a required element within
an optional choice.
■ Boldface indicates use of a CLI command, part of a CLI command syntax,
or other displayed element in general text. For example:
“Use the copy tftp command to download the key from a TFTP server.”
■ Italics indicate variables for which you must supply a value when execut-
ing the command. For example, in this command syntax, you must provide
one or more port numbers:
Syntax: aaa port-access authenticator < port-list >
1-2