HP ProCurve 6400cl Series - Using Qos Classifiers to Configure Quality of Service for; Viewing the Qos Configuration; Using Qos Classifiers to Configure Quality of Service for Outbound Traffic

Quality of Service (QoS): Managing Bandwidth More Effectively
Using QoS Classifiers To Configure Quality of Service for Outbound Traffic
Using QoS Classifiers To Configure
Quality of Service for Outbound Traffic
QoS Feature Default Menu CLI Web
UDP/TCP Priority Disabled — page 8-24 Refer to Online Help.
IP-Device Priority Disabled — page 8-30 “
IP Type-of-Service Priority Disabled — page 8-36 “
LAN Protocol Priority Disabled — page 8-49 “
VLAN-ID Priority Disabled — page 8-51 “
Source-Port Priority Disabled — page 8-57 “
Note In addition to the information in this section on the various QoS classifiers,
refer to “QoS Operating Notes and Restrictions” on page 8-70.
Viewing the QoS Configuration
All of these commands are available on the 5300xl switches. All except the
protocol-priority command are available on the 3400cl/6400cl switches. Exam-
ples of the show qos output are included with the example for each priority
type.
Syntax: show qos < priority-classifier >
tcp-udp-port-priority
Displays the current TCP/UDP port priority configura-
tion. Refer to figure
8-11 on page 8-30.
device-priority
Displays the current device (IP address) priority con-
figuration. Refer to figure 8-12 on page 8-32.
8-22