Access Control Lists (ACLs) for the Series 3400cl and Series 6400cl Switches
Deleting an ACL from the Switch
Deleting an ACL from the Switch
Syntax: no ip access-list standard < name-str | 1-99 >
no ip access-list extended < name-str | 100-199 >
Removes the specified ACL from the switch’s running
config file.
Note: You cannot delete an ACL from the switch while the
ACL is assigned to any interfaces. Thus, before deleting an
ACL from the switch, remove all assignments of the ACL to
specific interfaces. If you need to delete an ACL
assignment, refer to
“Enabling or Disabling ACL Filtering
on an Interface” on page 10-57.
Displaying ACL Data
ACL Commands Function Page
show access-list
show access-list config
show access-list ports
< all | < interface >>
show access-list < acl-name-string >
show access-list resources
show config
show running
View a brief listing of all ACLs on the switch. 10-59
Display the ACL lists configured in the switch. 10-59
List the name and type of ACLs assigned to all 10-60
ports on the switch or to a particular port or
static trunk configured on the switch.
Display detailed content information for a 10-61
specific ACL.
Displays the currently available per-port rule 10-63
and ACL mask resources.
show config includes configured ACLs and
assignments existing in the startup-config file.
show running includes configured ACLs and
assignments existing in the running-config file.
10-58
To Next Page
Loading...
