Compaq ProLiant DL380 Generation2 Server Maintenance and Service Guide 2-1
COMPAQ CONFIDENTIAL Codename: Magna Part Number: 203840-003 Last Saved On: 1/28/02 1:12 PM
2
Removal and Replacement Procedures
This chapter provides subassembly/module-level removal and replacement procedures for
ProLiant DL380 Generation 2 servers. After completing all necessary removal and
replacement procedures, run the Diagnostics program to verify that all components operate
properly.
You need the following items for some procedures:
• Torx T-15 screwdriver
• Diagnostics Utility from the Compaq SmartStart™ for Servers CD
Safety Considerations
Before performing service procedures, review the following safety information.
Electrostatic Discharge
A discharge of static electricity can damage static-sensitive devices or microcircuitry. Proper
packaging and grounding techniques are necessary to prevent damage. To prevent
electrostatic damage, observe the following precautions:
• Transport products in static-safe containers such as conductive tubes, bags, or boxes.
• Keep electrostatic-sensitive parts in their containers until they arrive at static-free
stations.
• Cover workstations with approved static-dissipating material. Use a wrist strap connected
to the work surface and properly grounded tools and equipment.
• Keep the work area free of nonconductive materials such as ordinary plastic assembly
aids and foam packing.
• Always be properly grounded when touching a static-sensitive component or assembly.
• Avoid touching pins, leads, or circuitry.
• Always place drives PCB assembly-side down.
• Use conductive field service tools.
To Next Page
Loading...
