Removal and Replacement Procedures
Compaq ProLiant DL380 Generation2 Server Maintenance and Service Guide 2-67
COMPAQ CONFIDENTIAL Codename: Magna Part Number: 203840-003 Last Saved On: 1/28/02 1:12 PM
Optional SCSI Cable (Long)
To remove the long SCSI cable:
1. Power down the server. See the “Powering Down the Server” section in this chapter.
2. Extend or remove the server from the rack. See the “Preparation Procedures” section in
this chapter.
3. Remove the access panel. See the “Access Panel” section in this chapter.
4. Disconnect the SCSI cable from the SCSI backplane
.
5. Disconnect the SCSI cable from the optional PCI array controller expansion board
.
2
1
Figure 2-62: Removing the long SCSI cable
Reverse steps 1 through 5 to replace the long SCSI cable.
To Next Page
Loading...
