Troubleshooting 285
Action: Perform the following steps to resolve the problem. Stop when the
problem is resolved.
1. Reseat the server.
Refer to server documentation on the HP website
(http://www.hp.com/products/servers/proliant-bl/p-class/info
).
Server blade management module board error codes
LED Code: 9-1, 9-2, 9-3, 9-4, 9-5, 9-6, 9-7, 9-8, 9-9, 9-10, 9-11, or 9-12
Location: Server blade management module
Action: Perform the following steps to resolve the problem. Stop when the
problem is resolved.
1. Press the server blade management module reset button.
2. Replace the server blade management module.
Server blade management module signal backplane error codes
LED Code: 10-1, 10-2, or 10-3
Location: Server blade management backplane
Action: Perform the following steps to resolve the problem. Stop when the
problem is resolved.
1. Press the server blade management module reset button.
2. Replace the signal backplane.
For more information, refer to the HP BladeSystem Maintenance and Service
Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-
class/info).
Server blade management module power backplane A error codes
LED Code: 11-1, 11-2, 11-3, or 11-4
Location: Server blade power backplane A
To Next Page
Loading...
