HP ProLiant ML370 Generation 4 - Page 290

290 HP ProLiant ML370 Generation 4 Server Reference and Troubleshooting Guide
Power management module error codes
List of messages:
Power supply error codes ...........................................................................................................290
Power management module board error codes...........................................................................290
Power management module backplane error codes....................................................................291
Unknown power management module error code......................................................................291
Power supply error codes
Location LED Codes
1-1 or 1-2
Power Supply - Slot 2 2-1 or 2-2
Power Supply - Slot 3 3-1 or 3-2
Power Supply - Slot 4 4-1 or 4-2
5-1 or 5-2
6-1 or 6-2
Power Supply - Slot 1
Power Supply - Slot 5
Power Supply - Slot 6
Action: Perform the following steps to resolve the problem. Stop when the
problem is resolved.
1. Reseat the power supply.
For more information, refer to the HP BladeSystem Maintenance and Service
Guide on the HP website (http://www.hp.com/products/servers/proliant-bl/p-
class/info).
2. Reseat the power management module.
3. Replace the power supply.
Power management module board error codes
LED Code: 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, or 7-13
Location: Power management board
Action: Perform the following steps to resolve the problem. Stop when the
problem is resolved.