To Next Page

To Previous Page

6. Separate the display assembly (2) from the top cover.

7. To remove the display bezel:

a. Flex the inside of the left and right sides (1) and the top (2) of the bezel to release the bezel from

the display back cover.

b. Starting on the side of the bottom of the bezel, insert a tool (3) and pull it along the bottom to

release the bezel.

c. Remove the display bezel (4).

Bezel protective Mylar is available in the Plastic Kit as spare part number N06911-001.

Bezel adhesive is available in the LCD Support Kit as spare part number M27375-001.

The bezel is available using the following spare part numbers:

● N56094-001—Models with a 5 MP + IR camera

Display assembly

Questions and Answers:

Need help?

Do you have a question about the HP ZBook Power G10 and is the answer not in the manual?

HP ZBook Power G10 Specifications

General

Operating System	Windows 11 Pro
Processor	Up to Intel Core i9-13900H
Graphics	NVIDIA RTX A2000 Laptop GPU
Display	15.6" diagonal, FHD (1920 x 1080) or UHD (3840 x 2160), IPS, anti-glare
Memory	Up to 64 GB DDR5
Storage	Up to 2 TB PCIe NVMe SSD
Battery	83 Wh Li-ion polymer
Ports	headphone/microphone combo
Wireless	Intel Wi-Fi 6E AX211 (2x2) and Bluetooth 5.3