EasyManua.ls Logo

HTC Tattoo - Adding the Bluetooth Widget; Using Your Phone as a Modem

HTC Tattoo
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
112  Getting Connected
Tap Disconnect & unpair if you want the phone to erase all pairing information 
with the hands-free headset or car kit. You will be prompted to enter the passcode 
again when you connect to that Bluetooth device.
Adding the Bluetooth widget
Add the Bluetooth widget to the Home screen to make it faster for you to turn 
Bluetooth on or off.
To learn how to add widgets, refer to “To add an HTC widget” in Chapter 1.
6.6 Using Your Phone as a Modem
If you find yourself in a place without an Internet access for your computer, you can 
connect your computer to the Internet by using your phone’s data connection 
(3G, for instance) or Wi-Fi connection.
Important  You need to install HTC Sync before you can use your phone as a modem. 
Refer to “Using HTC Sync “ in Chapter 9 for details.
Note  You need a SIM card installed on your phone to use it as a modem for your computer. 
1. Make sure your phone’s data connection is turned on. See “Turning GPRS/3G 
on or off” earlier in this chapter to learn how to turn on the phone’s data 
connection.
2. Connect the phone to the computer using the provided USB cable.
3. When the Select default type dialog box appears, select Mobile network
sharing, and then tap Done.
Note  When using Mobile network sharing, the USB mass storage feature is disabled. 
Also, you will not be able to use HTC Sync.

Table of Contents