32 Phone Basics
1.3 Charging the Battery
New batteries are not charged when shipped. Before you start using your phone,
you need to charge the battery. Some batteries perform best after several full
charge/discharge cycles.
Important When the phone is shipped, the battery is already installed on the phone.
A thin film is inserted in between the battery and the battery compartment.
You need to remove this film before charging the battery.
To charge the battery
Plug the USB connector of the AC adapter to the USB connector at the
bottom of your phone.
Plug in the AC adapter to an electrical outlet to start charging the battery.
Note Only the AC adapter and USB cable provided with your phone must be used to
charge the battery.
Charging is indicated by a solid amber light in the Notification LED. As the battery
is being charged while the phone is on, the charging battery icon ( ) is displayed
in the status bar of the Home screen. After the battery has been fully charged, the
Notification LED shows a solid green light and a full battery icon ( ) displays in
the status bar of the Home screen.
Warning! • Do not remove the battery from the phone while you are charging it.
• As a safety precaution, the battery stops charging before it overheats.
1.
2.
To Next Page
Loading...
