HTC Tattoo - Page 199

Appendix 199
ETSI EN 301 489-7
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 7: Specific conditions for mobile and portable radio and
ancillary equipment of digital cellular radio telecommunications systems
(GSM and DCS).
ETSI EN 301 489-17
Electromagnetic compatibility and Radio spectrum Matters (ERM);
Electromagnetic Compatibility (EMC) standard for radio equipment and
services; Part 17: Specific conditions for 2.4 GHz wideband transmission
systems.
EN 301 489-3
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and
services; Part 3: Specific conditions for Short-Range Devices (SRD) operating
on frequencies between 9 kHz and 40 GHz.
ETSI EN 301 908-1 & -2
Electromagnetic compatibility and Radio spectrum Matters (ERM); Base
Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third
Generation cellular networks; Part 1: Harmonised EN for IMT-2000,
introduction and common requirements, covering essential requirements of
article 3.2 of the R&TTE Directive.
EN 62209-1 / 62209-2
Human exposure to radio frequency fields from hand-held and body-
mounted wireless communication devices - Human models, instrumentation,
and procedures -- Part 1: Procedure to determine the specific absorption rate
(SAR) for hand-held devices used in close proximity to the ear (frequency
range of 300 MHz to 3GHz) ; Part 2: Procedure to determine the Specific
Absorption Rate (SAR) in the head and body for 30 MHz to 6 GHz Handheld
and Body-Mounted Devices used in close proximity to the Body.
•
•
•
•
•