l Run the display bgp vpnv4 all routing-table command to check the IPv4 VPN routes on
the PE or ASBR.
l Run the display ip routing-table vpn-instance vpn-instance-name command to check the
VPN routing table on the PE or ASBR.
----End
Example
After the successful configuration, run the display bgp vpnv4 all peer command on the PE or
ASBR, and you can view that the BGP VPNv4 peer relationship between the ASBR and PE in
the same AS is "Established".
<Huawei> display bgp vpnv4 all peer
BGP local router ID : 10.1.1.1
Local AS number : 100
Total number of peers : 1 Peers in established state : 1
Peer V AS MsgRcvd MsgSent OutQ Up/Down State
PrefRcv
2.2.2.2 4 100 2 2 0 00:00:00 Established
0
Run the display bgp vpnv4all routing-table command on the PE or the ASBR, and you can
view the VPNv4 routes on ASBR.
<Huawei> display bgp vpnv4 all all routing-table
Local AS number : 100
BGP Local router ID is 2.2.2.9
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total number of routes from all PE: 5
Route Distinguisher: 100:1
Network NextHop MED LocPrf PrefVal Path/Ogn
*>i 10.1.1.0/24 1.1.1.9 0 100 0 ?
Route Distinguisher: 100:2
Network NextHop MED LocPrf PrefVal Path/Ogn
*> 10.2.1.0/24 192.1.1.2 0 200?
*> 192.1.1.0 0.0.0.0 0 0 ?
* 192.1.1.2 0 0 200?
*> 192.1.1.1/32 0.0.0.0 0 0 ?
VPN-Instance vpn1, router ID 2.2.2.9:
Total Number of Routes: 5
Network NextHop MED LocPrf PrefVal Path/Ogn
*>i 10.1.1.0/24 1.1.1.9 0 100 0 ?
*> 10.2.1.0/24 192.1.1.2 0 200?
*> 192.1.1.0 0.0.0.0 0 0 ?
192.1.1.2 0 0 200?
*> 192.1.1.1/32 0.0.0.0 0 0 ?
Run the display ip routing-table vpn-instance command on the PE or ASBR, and you can view
all the relevant routes in the VPN routing table.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
95
To Next Page
Loading...
Need help?
General
