EasyManua.ls Logo

Huawei AR1200 Series - Configuring a VPN Instance

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can configure MP-IBGP to exchange routes between PEs. To exchange routes between the
PE and CE, you can configure static routes, RIP multi-instance, OSPF multi-instance, IS-IS
multi-instance, or BGP based on the specific networking situations.
NOTE
If a VPN is used to receive the external routes and the routes advertised by non-PE devices, and advertise
these routes to PEs, the VPN is called a transit VPN.
If a VPN is used to accept the internal routes and the routes advertised by PEs, the VPN is called a stub
VPN. In most cases, the static route is only used to exchange routes between the PE and CE in the stub
VPN.
Pre-configuration Tasks
Before configuring basic BGP/MPLS IP VPN, complete the following tasks:
l Configuring IGP for the MPLS backbone network (PE, P) to implement IP connectivity
l Configuring basic MPLS functions and MPLS LDP for the MPLS backbone network (PE,
P)
l Configuring tunnels between PEs based on the tunnel policy
l Configuring the IP address for the CE interface that is connected to the PE
Data Preparation
To configure basic BGP/MPLS IP VPN, you need the following data.
No.
Data
1 Data for configuring a VPN instance:
l Name of the VPN instance
l (Optional) Description of the VPN instance
l RD, VPN target attribute of the VPN instance IPv4 address families
l (Optional) Routing policy used to control the sending and receiving of VPN routes
l (Optional) Tunnel policy
l (Optional) Maximum number of routes permitted in a VPN instance IPv4 address
family
2
IP address of the PE interface that is connected to the CE
3 Route-exchanging mode between the PE and CE, which can be the static route, RIP,
OSPF, IS-IS, or BGP
4 AS number of the PE
5 IP address and interface of the PE used to establish the BGP peer relationship
3.4.2 Configuring a VPN Instance
This section describes how to configure a VPN instance to manage VPN routes.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
71

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals