EasyManua.ls Logo

Huawei AR1200 Series - Optional) Configuring IS-IS between an MCE and a PE; Checking the Configuration

Huawei AR1200 Series
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2.4.5 (Optional) Configuring IS-IS Between an MCE and a PE
Context
Do as follows on the MCE.
You need to perform similar configurations on a PE. For details, refer to manuals of
corresponding products.
Procedure
Step 1 Run the system-view command to enter the system view.
Step 2 Run the interface interface-type interface-number command to enter the view of the interface
bound to the VPN instance.
Step 3 Run the isis enable [ process-id ] command to enable IS-IS on the interface.
By default, IS-IS is disabled on a VLANIF interface.
Step 4 Run the isis [ process-id ] vpn-instance vpn-instance-name command to create an IS-IS process
used by a VPN instance and enter the IS-IS view.
Step 5 Run the network-entity net command to configure a NET.
By default, no NET is configured for an IS-IS process.
Step 6 (Optional) Run the import-route protocol [ process-id ] [ cost-type { external | internal } |
cost cost | tag tag | route-policy route-policy-name | [ level-1 | level-2 | level-1-2 ] ]
*
command
to import routes from other routing protocols.
If another routing protocol is run between an MCE and a site in this VPN, you need to perform
this step.
----End
2.4.6 Checking the Configuration
Run the display ip routing-table vpn-instance command on the PE, and you can find the routes
to the local VPN. Take Huawei Huawei AR1200 Series as an example. The information is
displayed as follows:
[PE1] display ip routing-table vpn-instance vpnb
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: vpnb
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost Flags NextHop Interface
172.18.0.0/16 Direct 0 0 D 172.18.1.1 Ethernet0/
0/0
172.18.1.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
172.18.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
192.168.0.0/16 O_ASE 150 1 D 172.16.1.1 Ethernet0/
0/0
255.255.255.255/32 Direct 0 0 D 127.0.0.1 InLoopBack0
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 2 MCE Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
53

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals