EasyManuals Logo

Huawei AR1200 Series Configuration Guide

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #130 background imageLoading...
Page #130 background image
The BGP view is displayed.
3. Run:
peer ipv4-address as-number
The PE is configured as the peer.
4. (Optional) Run:
peer { ipv4-address | group-name } ebgp-max-hop [ hop-count ]
The maximum number of hops in the EBGP connection is specified.
5. Run:
import-route { direct | static | rip [ process-id ] | ospf process-id |
isis process-id } [ med med | route-policy route-policy-name ]
*
Routes of the local site are imported.
----End
3.9.8 Checking the Configuration
After configuring inter-AS VPN Option C (solution 2), you can view information about all the
BGP peer relationships, VPNv4 routes on PEs, and labels of IPv4 routes on ASBRs.
Prerequisites
The configurations of the Inter-AS VPN Option C (Solution 2) function are complete.
Procedure
l Run the display bgp vpnv4 all peer command to check information about the specified
VPNv4 peer on a PE.
l Run the display bgp vpnv4 all routing-table command to check information about the
VPN-IPv4 routing table on a PE or an ASBR.
l Run the display bgp routing-table label command to check information about the labels
of IPv4 routes on an ASBR.
l Run the display ip routing-table vpn-instance vpn-instance-name command to check the
VPN routing table on a PE.
l Run the display mpls route-state [ vpn-instance vpn-instance-name ] [ { exclude |
include } { idle | ready | settingup } * | destination-address mask-length ] [ verbose ]
command to check the matching relationship between routes and the LSP on an ASBR.
l Run the display ip routing-table command to check information about the routing table
on an ASBR.
l Run the display mpls lsp [ vpn-instance vpn-instance-name ] [ protocol ldp ]
[ { exclude | include } ip-address mask-length ] [ outgoing-interface interface-type
interface-number ] [ in-label in-label-value ] [ out-label out-label-value ] [ lsr-role
{ egress | ingress | transit } ] [ verbose ] command to check whether an LDP LSP is
established on an ASBR.
----End
Example
Run the display bgp vpnv4 all peer command. The command output shows that the EBGP peer
relationship between PEs is established.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
119

Table of Contents

Other manuals for Huawei AR1200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei AR1200 Series and is the answer not in the manual?

Huawei AR1200 Series Specifications

General IconGeneral
BrandHuawei
ModelAR1200 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals