Huawei AR1200 Series - Monitoring CPU and Memory Usage

#
ipv4-family unicast
undo synchronization
peer 1.1.1.9 enable
peer 3.3.3.9 enable
peer 3.3.3.9 label-route-capability
#
ipv4-family vpnv4
policy vpn-target
peer 1.1.1.9 enable
#
ipv4-family vpn-instance vpn1
peer 10.2.1.1 as-number 65002
import-route direct
#
ospf 1
area 0.0.0.0
network 4.4.4.9 0.0.0.0
network 162.1.1.0 0.0.0.255
#
return
l Configuration file of CE2
#
sysname CE2
#
interface GigabitEthernet1/0/0
ip address 10.2.1.1 255.255.255.0
#
bgp 65002
peer 10.2.1.2 as-number 200
#
ipv4-family unicast
undo synchronization
import-route direct
peer 10.2.1.2 enable
#
return
3.18.7 Example for Configuring Inter-AS VPN Option C (Solution
2)
If no MP-IBGP relationships are established between PEs and ASBRs, you can use LDP to
allocate labels for BGP and implement the inter-AS VPN OptionC solution.
Networking Requirements
As shown in Figure 3-8. CE1 and CE2 belong to the same VPN. CE1 accesses AS100 through
PE1, and CE2 accesses AS200 through PE2.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
197