Huawei AR1200 Series - Configuring the OSPF Multi-Instance on the Multi-Instance CE

Step 5 Run:
quit
The OSPF view is displayed.
Step 6 Run:
import-route bgp
The BGP route is imported.
Step 7 Run:
quit
Return to the system view.
Step 8 Run:
bgp as-number
The BGP view is displayed.
Step 9 Run:
ipv4-family vpn-instance vpn-instance-name
The BGP-VPN instance IPv4 address family view is displayed.
Step 10 Run:
import-route ospf process-id
The OSPF multi-instance route is imported.
----End
3.11.3 Configuring the OSPF Multi-Instance on the Multi-Instance
CE
The process ID of the OSPF multi-instance configured on the multi-VPN-instance CE must be
the same as that configured on the PE.
Context
Perform the following steps on the multi-instance CE.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
ospf process-id [ router-id router-id ] vpn-instance vpn-instance-name
The OSPF multi-instance is configured.
The OSPF process ID corresponds to that of the PE.
Step 3 Run:
area area-id
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
125