EasyManua.ls Logo

Huawei AR1200 Series - Configuration Examples; Example for Configuring BGPMPLS IP VPN

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Procedure
l Run the refresh bgp vpn-instance vpn-instance-name ipv4-family { all | ipv4-address |
group group-name | internal | external } import command in the user view to trigger the
inbound soft reset of the VPN instance IPv4 address family's BGP connection.
l Run the refresh bgp vpn-instance vpn-instance-name ipv4-family { all | ipv4-address |
group group-name | internal | external } export command in the user view to trigger the
outbound soft reset of the VPN instance IPv4 address family's BGP connection.
l Run the refresh bgp vpnv4 { all | ipv4-address | group group-name | internal | external }
import command in the user view to trigger the inbound soft reset of the BGP VPNv4
connection.
l Run the refresh bgp vpnv4 { all | ipv4-address | group group-name | internal | external }
export command in the user view to trigger the outbound soft reset of the BGP VPNv4
connection.
l Run the reset bgp vpn-instance vpn-instance-name ipv4-family { as-number | ipv4-
address | group group-name | all | internal | external } command in the user view to reset
BGP connections of the VPN instance IPv4 address family.
l Run the reset bgp vpnv4 { as-number | ipv4-address | group group-name | all | internal |
external } command in the user view to reset BGP VPNv4 connections.
----End
3.18 Configuration Examples
This section provides several configuration examples of VPN networking. In each configuration
example, the networking requirements, configuration roadmap, configuration notes,
configuration procedures, and configuration files are described.
3.18.1 Example for Configuring BGP/MPLS IP VPN
This section describes how to configure the basic BGP/MPLS IP VPN, which involves the
configurations of MPLS LSPs, VPNv4 peers, and VPN instances.
Networking Requirements
As shown in Figure 3-2:
l CE1 and CE3 are in VPN-A.
l CE2 and CE4 are in VPN-B.
l The VPN target attribute of VPN-A is 111:1, and that of VPN-B is 222:2.
l Users in different VPN cannot access each other.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
150

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals