2 MCE Configuration
About This Chapter
Generally, a Customer Edge (CE) can connect to only one Virtual Private Network (VPN). If
multiple VPNs need to be divided, multiple CEs are required. The Multi-VPN-Instance CE
(MCE) technology enables a CE to be connected to multiple VPNs. This isolates services
between different VPNs and reduces the investment on network devices.
2.1 Introduction to MCE
MCE isolates different services or users by using the route multi-instance on the CE.
2.2 Configuring a VPN Instance
This section describes how to configure a VPN instance.
2.3 Configuring a Route Multi-Instance Between an MCE and a Site
This section describes how to configure static routes, RIP, OSPF, IS-IS, and BGP between an
MCE and a site.
2.4 Configuring a Route Multi-Instance Between an MCE and a PE
This section describes how to configure static routes, RIP, OSPF, IS-IS, and BGP between an
MCE and a PE.
2.5 MCE Configuration Examples
This section provides several configuration examples of MCE.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 2 MCE Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
41
To Next Page
Loading...
Need help?
General
