EasyManuals Logo

Huawei AR1200 Series Configuration Guide

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #134 background imageLoading...
Page #134 background image
Prerequisites
The configurations of the HoVPN function are complete
Procedure
l Run the display ip routing-table command to check the routing table on the CE.
----End
Example
Run the display ip routing-table on the CE connected with the UPE. The command output
shows that there is a default route whose next hop is the UPE and there is no route to the network
segment where the peer CE resides.
<CE> display ip routing-table
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: Public
Destinations : 5 Routes : 5
Destination/Mask Proto Pre Cost Flags NextHop Interface
0.0.0.0/0 BGP 255 0 D 10.1.1.2 GigabitEthernet1/0/0
10.1.1.0/24 Direct 0 0 D 10.1.1.1
GigabitEthernet1/0/0
10.1.1.1/32 Direct 0 0 D 127.0.0.1
InLoopBack0GigabitEthernet1/0/0
127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0
3.11 Configuring a Multi-VPN-Instance CE
By using OSPF multi-instance on CEs, you can implement service isolation on the LAN.
3.11.1 Establishing the Configuration Task
Before configuring a multi-VPN-instance CE, familiarize yourself with the applicable
environment, complete the pre-configuration tasks, and obtain the data required for the
configuration. This will help you complete the configuration task quickly and accurately.
Applicable Environment
The multi-VPN-instance CE is used in the LAN. You can implement service isolation through
the multiple OSPF instances on the CE devices.
One OSPF process can belong to only one VPN instance but one VPN instance can run several
OSPF processes.
The Multi-VPN-Instance CE can be considered a networking solution that isolates services by
isolating routes. Before configuring a multi-VPN-instance CE, disable routing loop detection.
Pre-configuration Tasks
Before configuring a multi-VPN-instance CE, complete the following tasks:
l Configuring a VPN Instance on the multi-instance CE, and the PE that is accessed by it
(each service with a VPN instance)
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123

Table of Contents

Other manuals for Huawei AR1200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei AR1200 Series and is the answer not in the manual?

Huawei AR1200 Series Specifications

General IconGeneral
BrandHuawei
ModelAR1200 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals