Huawei AR1200 Series - Configuring Route Reflection for the Routes of the BGP VPN Instance

2. Run:
bgp as-number
The BGP view is displayed.
3. Run:
ipv4-family vpn-instance vpn-instance-name
The BGP VPN instance IPv4 address family view is displayed.
4. Run:
group group-name [ internal ]
An IBGP peer group is created.
5. Run:
peer group-name connect-interface interface-type interface-number
The interface is specified as an interface to establish the TCP connection.
6. Run:
peer ip-address groupgroup-name
The peer is added to the peer group.
l Establishing the MP-IBGP Connection with Each Peer
Perform Step 1 to Step 5 repeatedly on the RR to establish MP-IBGP connections with all
client CEs.
1. Run:
system-view
The system view is displayed.
2. Run:
bgp as-number
The BGP view is displayed.
3. Run:
ipv4-family vpn-instance vpn-instance-name
The BGP VPN instance IPv4 address family view is displayed.
4. Run:
peer ipv4-address as-number as-number
The peer of the BGP IPv4 VPN instance is configured.
5. Run:
peer ipv4-address connect-interface interface-type interface-number
The interface is specified as an interface to establish the TCP connection.
----End
3.16.4 Configuring Route Reflection for the Routes of the BGP VPN
Instance
The premise of enabling BGP VPNv4 route reflection is that the RR has established the MP-
IBGP connections with all its clients (CEs).
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
143