EasyManuals Logo

Huawei AR1200 Series Configuration Guide

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #158 background imageLoading...
Page #158 background image
2.2.2.2 4 100 13 15 0 00:11:12 Established
0
3.17 Maintaining BGP/MPLS IP VPN
This section describes how to maintain the BGP/MPLS IP VPN, which involves L3VPN traffic
checking, network connectivity monitoring, BGP connection resetting.
3.17.1 Viewing the Integrated Route Statistics of All IPv4 VPN
Instances
Integrated route statistics of all VPN instances refer to the sum of statistics of all VPN instances.
Procedure
l Run the display ip routing-table all-vpn-instance statistics command to check the
integrated route statistics of all VPN instances.
----End
3.17.2 Displaying BGP/MPLS IP VPN Information
This section describes how to monitor the running status of the BGP/MPLS IP VPN, which
involves VPN instance information checking, VPNv4 peer information checking, and BGP peer
log information checking.
Context
In routine maintenance, you can run the following commands in any view to check the status of
BGP/MPLS IP VPN.
Procedure
l Run the display ip routing-table vpn-instance vpn-instance-name command to check the
IP routing table of a VPN instance.
l Run the display ip vpn-instance [ verbose ] [ vpn-instance-name ] command to check
information about the VPN instance.
l Run the display bgp [ vpnv4 { all | vpn-instance vpn-instance-name } ] routing-table
label command to check information about labeled routes in the BGP routing table.
l Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-
instance vpn-instance-name } routing-table ipv4-address [ mask | mask-length ] command
to check information about the BGP VPNv4 routing table.
l Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-
instance vpn-instance-name } routing-table statistics command to check statistics about
the BGP VPNv4 routing table.
l Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-
instance vpn-instance-name } routing-table command to check information about the
BGP VPNv4 routing table.
l Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } group [ group-
name ] command to check information about the BGP VPNv4 peer group.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
147

Table of Contents

Other manuals for Huawei AR1200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei AR1200 Series and is the answer not in the manual?

Huawei AR1200 Series Specifications

General IconGeneral
BrandHuawei
ModelAR1200 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals