Huawei AR1200 Series Configuration Guide

The level of the router is configured.
By default, the level of a router is Level-1-2.
5. Run:
import-route bgp [ cost-type { external | internal } | cost cost | tag
tag | route-policy route-policy-name | [ level-1 | level-2 | level-1-2 ] ]
*
The BGP route is imported.
6. Run:
quit
Return to the system view.
7. Run:
interface interface-type interface-number
The view of the interface bound to the VPN instance is displayed.
8. Run:
isis enable [ process-id ]
IS-IS is enabled on the interface.
9. Run:
quit
The system view is displayed.
10. Run:
bgp as-number
The BGP view is displayed.
11. Run:
ipv4-family vpn-instance vpn-instance-name
The BGP VPN instance IPv4 address family view is displayed.
12. Run:
import-route isis process-id [ med med | route-policy route-policy-name ]
*
The IS-IS route is imported into the routing table of the BGP VPN instance IPv4
address family.
NOTE
After the VPN instance is deleted or the IPv4 address family of the VPN instance is disabled,
all IS-IS processes are deleted.
----End
3.4.7 Checking the Configuration
After configuring the basic BGP/MPLS IP VPN function, you can view IPv4 VPN information
about the local and remote sites on the PE or the CE.
Prerequisites
The basic BGP/MPLS IP VPN function configurations are complete.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
83

Huawei AR1200 Series Specifications

General

Brand	Huawei
Model	AR1200 Series
Category	Network Router
Language	English