EasyManuals Logo

Huawei AR1200 Series Configuration Guide

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
to check information about the routes received from the peer or the routes advertised to the
peer on the RR or the Client PEs.
l Run the display bgp vpnv4 all group [ group-name ] command to check information about
the VPNv4 peer group on the RR.
----End
Example
If the configurations succeed,
l The status of the MP IBGP connections between the RR and all Client PEs is "Established"
after running the display bgp vpnv4 all peer command on the RR or Client PEs.
<Huawei> display bgp vpnv4 all peer
BGP local router ID : 1.1.1.9
Local AS number : 100
Total number of peers : 3 Peers in established state : 3
Peer V AS MsgRcvd MsgSent OutQ Up/Down State PrefRcv
2.2.2.9 4 100 2 4 0 00:00:31 Established 0
3.3.3.9 4 100 3 5 0 00:01:23 Established 0
Peer of IPv4-family for vpn instance :
VPN-Instance vpna, router ID 1.1.1.9:
10.1.1.1 4 65410 79 82 0 01:13:29 Established 0
l The RR and each Client PE can receive and send VPNv4 routing information between each
other after running the display bgp vpnv4 all routing-table peer command on the RR or
the Client PEs.
<Huawei> display bgp vpnv4 all routing-table peer 2.2.2.9 received-routes
BGP Local router ID is 1.1.1.9
Status codes: * - valid, > - best, d - damped,
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
Total Number of Routes: 1
Route Distinguisher: 100:1
Network NextHop MED LocPrf PrefVal Path/Ogn
*>i 1.1.1.1 2.2.2.9 0 100 0 i
l If the peer group is configured, information about the group members is displayed and the
status of the BGP connections between the RR and the group members is "Established"
after running the display bgp vpnv4 all group command on the RR.
<Huawei> display bgp vpnv4 all group vpna
Group in VPNV4:
BGP peer-group: vpna
Remote AS: 100
Authentication type configured: None
Type : internal
Configured hold timer value: 180
Keepalive timer value: 60
Connect-retry timer value: 32
Minimum route advertisement interval is 0 seconds
Connect-interface has been configured
PeerSession Members:
2.2.2.2
Peer Preferred Value: 0
No routing policy is configured
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
140

Table of Contents

Other manuals for Huawei AR1200 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei AR1200 Series and is the answer not in the manual?

Huawei AR1200 Series Specifications

General IconGeneral
BrandHuawei
ModelAR1200 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals