Huawei AR1200 Series - Accessing Files on Another Device Using SFTP

[CE1] ping -a 100.1.1.1 200.1.1.1
PING 200.1.1.1: 56 data bytes, press CTRL_C to break
Reply from 200.1.1.1: bytes=56 Sequence=1 ttl=253 time=109 ms
Reply from 200.1.1.1: bytes=56 Sequence=2 ttl=253 time=67 ms
Reply from 200.1.1.1: bytes=56 Sequence=3 ttl=253 time=66 ms
Reply from 200.1.1.1: bytes=56 Sequence=4 ttl=253 time=85 ms
Reply from 200.1.1.1: bytes=56 Sequence=5 ttl=253 time=70 ms
--- 200.1.1.1 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 66/79/109 ms
----End
Configuration Files
l Configuration file of CE1
#
sysname CE1
#
interface GigabitEthernet1/0/0
ip address 10.1.1.1 255.255.255.0
#
interface GigabitEthernet2/0/0
ip address 100.1.1.1 255.255.255.0
#
bgp 600
peer 10.1.1.2 as-number 100
#
ipv4-family unicast
undo synchronization
import-route direct
peer 10.1.1.2 enable
#
return
l Configuration file of PE1
#
sysname PE1
#
ip vpn-instance vpn1
ipv4-family
route-distinguisher 100:1
vpn-target 1:1 export-extcommunity
vpn-target 1:1 import-extcommunity
#
mpls lsr-id 1.1.1.9
mpls
#
mpls ldp
#
interface GigabitEthernet1/0/0
ip binding vpn-instance vpn1
ip address 10.1.1.2 255.255.255.0
#
interface GigabitEthernet2/0/0
ip address 20.1.1.1 255.255.255.0
mpls
mpls ldp
#
interface LoopBack1
ip address 1.1.1.9 255.255.255.255
#
bgp 100
peer 3.3.3.9 as-number 100
peer 3.3.3.9 connect-interface LoopBack1
#
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
164