Huawei AR1200 Series - Page 254

bfd for_ip_frr bind peer-ip 2.2.2.2
discriminator local 10
discriminator remote 20
commit
#
bgp 100
peer 2.2.2.2 as-number 100
peer 2.2.2.2 connect-interface LoopBack1
peer 3.3.3.3 as-number 100
peer 3.3.3.3 connect-interface LoopBack1
#
ipv4-family unicast
undo synchronization
peer 2.2.2.2 enable
peer 3.3.3.3 enable
#
ipv4-family vpnv4
policy vpn-target
peer 2.2.2.2 enable
peer 3.3.3.3 enable
#
ipv4-family vpn-instance vpn1
import-route direct
#
ospf 1
area 0.0.0.0
network 100.1.1.0 0.0.0.3
network 100.2.1.0 0.0.0.3
network 1.1.1.1 0.0.0.0
#
ip ip-prefix vpn_frr_list index 10 permit 2.2.2.2 32
#
route-policy vpn_frr_rp permit node 10
if-match ip next-hop ip-prefix vpn_frr_list
apply backup-nexthop 3.3.3.3
#
return
l Configuration file of the PE2
#
sysname PE2
#
bfd
#
ip vpn-instance vpn1
ipv4-family
route-distinguisher 100:2
vpn-target 111:1 export-extcommunity
vpn-target 111:1 import-extcommunity
#
mpls lsr-id 2.2.2.2
mpls
#
mpls ldp
#
interface Pos1/0/0
link-protocol ppp
ip address 100.1.1.2 255.255.255.252
mpls
mpls ldp
#
interface GigabitEthernet2/0/0
ip binding vpn-instance vpn1
ip address 10.1.1.2 255.255.255.252
#
interface LoopBack1
ip address 2.2.2.2 255.255.255.255
#
bfd for_ip_frr bind peer-ip 1.1.1.1
discriminator local 20
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 3 BGP MPLS IP VPN Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
243