Huawei AR1200 Series - Page 323

A PKI domain is specified.
Step 13 (Optional) Run:
sa binding vpn-instance vpn-instance-name
A VPN instance is specified to bind the IPSec tunnel.
NOTE
Before executing this command, configure the VPN instance.
Step 14 (Optional) Run:
local-id-type { ip | name }
The type of IKE ID is set.
By default, the IKE ID is in format of the IP address.
Step 15 (Optional) Run:
local-address address
An IP address is configured for the local end of IKE negotiation.
Step 16 Run:
quit
Return to the system view.
Step 17 (Optional) Run:
aaa
The AAA view is displayed.
Step 18 (Optional) Run:
service-scheme service-scheme-name
A service scheme is created and the service scheme view is displayed.
Step 19 (Optional) Run:
dns ip-address
The IP address of the primary DNS server is configured.
Step 20 (Optional) Run:
dns ip-address secondary
The IP address of the secondary DNS server is configured.
Step 21 (Optional) Run:
wins ip-address
The IP address of the primary WINS server is configured.
Step 22 (Optional) Run:
wins ip-address secondary
The IP address of the secondary WINS server is configured.
Step 23 (Optional) Run:
quit
The AAA view is displayed.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 5 IPSec Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
312