EasyManua.ls Logo

Huawei AR1200 Series - Page 327

Huawei AR1200 Series
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Procedure
Step 1 Configure IP addresses for the interfaces on RouterA and RouterB.
# Assign an IP address to the interface of RouterA.
<Huawei> system-view
[Huawei] interface ethernet 1/0/0
[Huawei-Ethernet1/0/0] ip address 202.138.163.1 255.255.255.0
[Huawei-Ethernet1/0/0] quit
# Assign an IP address to the interface of RouterB.
<Huawei> system-view
[Huawei] interface ethernet 1/0/0
[Huawei-Ethernet1/0/0] ip address 202.138.162.1 255.255.255.0
[Huawei-Ethernet1/0/0] quit
Step 2 Configure ACLs on RouterA and RouterB to define the data flows to be protected.
# Configure an ACL on RouterA.
[Huawei] acl number 3101
[Huawei-acl-adv-3101] rule permit ip source 10.1.1.0 0.0.0.255 destination 10.1.2.0
0.0.0.255
[Huawei-acl-adv-3101] quit
# Configure an ACL on RouterB.
[Huawei] acl number 3101
[Huawei-acl-adv-3101] rule permit ip source 10.1.2.0 0.0.0.255 destination 10.1.1.0
0.0.0.255
[Huawei-acl-adv-3101] quit
Step 3 Configure static routes to the peers on RouterA and RouterB.
# Configure a static route to the peer on RouterA. In this example, the next hop to PCB is
202.138.163.2.
[Huawei] ip route-static 10.1.2.0 255.255.255.0 202.138.163.2
# Configure a static route to the peer on RouterB. In this example, the next hop to PCA is
202.138.162.2.
[Huawei] ip route-static 10.1.1.0 255.255.255.0 202.138.162.2
Step 4 Create an IPSec proposal on RouterA and RouterB.
# Create the IPSec proposal on RouterA.
[Huawei] ipsec proposal tran1
[Huawei-ipsec-proposal-tran1] esp authentication-algorithm sha1
[Huawei-ipsec-proposal-tran1] quit
# Create the IPSec proposal on RouterB.
[Huawei] ipsec proposal tran1
[Huawei-ipsec-proposal-tran1] esp authentication-algorithm sha1
[Huawei-ipsec-proposal-tran1] quit
Run the display ipsec proposal command on RouterA and RouterB to view the configuration
of the IPSec proposal. Take the display on RouterA as an example.
[Huawei] display ipsec proposal
Number of Proposals: 1
IPsec proposal name: tran1
Encapsulation mode: Tunnel
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 5 IPSec Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
316

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals