EasyManua.ls Logo

Huawei AR1200 Series - Page 45

Huawei AR1200 Series
392 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[PE2-vpn-instance-vpn1-af-ipv4] vpn-target 111:1 export-extcommunity
[PE2-vpn-instance-vpn1-af-ipv4] vpn-target 111:1 import-extcommunity
[PE2-vpn-instance-vpn1-af-ipv4] quit
[PE2-vpn-instance-vpn1] quit
[PE2] interface gigabitethernet2/0/0
[PE2- GigabitEthernet2/0/0] ip binding vpn-instance vpn1
[PE2- GigabitEthernet2/0/0] ip address 11.1.1.2 255.255.255.0
Step 6 Configure the IS-IS route between CE1 and PE1.
# Configure CE1.
[CE1] isis 50
[CE1-isis-50] network-entity 50.0000.0000.0001.00
[CE1-isis-50] quit
[CE1] interface gigabitethernet1/0/0
[CE1-GigabitEthernet1/0/0] isis enable 50
[CE1-GigabitEthernet1/0/0] quit
[CE1] interface tunnel0/0/1
[CE1-Tunnel0/0/1] isis enable 50
[CE1-Tunnel0/0/1] quit
# Configure PE1.
[PE1] isis 50 vpn-instance vpn1
[PE1-isis-50] network-entity 50.0000.0000.0002.00
[PE1-isis-50] quit
[PE1] interface tunnel0/0/1
[PE1-Tunnel0/0/1] isis enable 50
[PE1-Tunnel0/0/1] quit
Step 7 Configure the IS-IS route between CE2 and PE2.
# Configure CE2.
[CE2] isis 50
[CE2-isis-50] network-entity 50.0000.0000.0004.00
[CE2-isis-50] quit
[CE2] interface gigabitethernet1/0/0
[CE2-GigabitEthernet1/0/0] isis enable 50
[CE2-GigabitEthernet1/0/0] quit
[CE2] interface gigabitethernet2/0/0
[CE2-GigabitEthernet2/0/0] isis enable 50
[CE2-GigabitEthernet2/0/0] quit
# Configure PE2.
[PE2] isis 50 vpn-instance vpn1
[PE2-isis-50] network-entity 50.0000.0000.0003.00
[PE2-isis-50] quit
[PE2] interface gigabitethernet2/0/0
[PE2-GigabitEthernet2/0/0] isis enable 50
[PE2-GigabitEthernet2/0/0] quit
Step 8 Set up the MP-BGP peer relationship between PE1 and PE2.
# On PE1, specify PE2 as an IBGP peer, set up the IBGP connection by using the loopback
interface, and enable the capability of exchanging VPN IPv4 routing information between PE1
and PE2.
[PE1] bgp 100
[PE1-bgp] peer 3.3.3.9 as-number 100
[PE1-bgp] peer 3.3.3.9 connect-interface loopback 1
[PE1-bgp] ipv4-family vpnv4
[PE1-bgp-af-vpnv4] peer 3.3.3.9 enable
[PE1-bgp-af-vpnv4] quit
# Enter the view of the BGP VPN instance vpn1 and import the direct routes and IS-IS routes.
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 1 GRE Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
34

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals