EasyManua.ls Logo

Huawei AR1200 Series - Page 68

Huawei AR1200 Series
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
[MCE] ospf 100 vpn-instance vpna
[MCE-ospf-100] area 0
[MCE-ospf-100-area-0.0.0.0] network 172.19.0.0 0.0.255.255
[MCE-ospf-100-area-0.0.0.0] quit
[MCE-ospf-100] quit
[MCE] ospf 200 vpn-instance vpnb
[MCE-ospf-200] area 0
[MCE-ospf-200-area-0.0.0.0] network 172.18.0.0 0.0.255.255
[MCE-ospf-200-area-0.0.0.0] quit
4. Configure RIP between the MCE and CE3, and between the MCE and CE4.
# Configure RIP-2 on the MCE.
[MCE] rip 100 vpn-instance vpna
[MCE-rip-100] version 2
[MCE-rip-100] network 172.17.0.0
[MCE-rip-100] import-route ospf 100
[MCE-rip-100] quit
[MCE] rip 200 vpn-instance vpnb
[MCE-rip-200] version 2
[MCE-rip-200] network 172.16.0.0
[MCE-rip-200] import-route ospf 200
# Configure RIP-2 on CE3.
[CE3] rip 200
[CE3-rip-200] version 2
[CE3-rip-200] network 172.16.0.0
[CE3-rip-200] network 192.168.1.0
[CE3-rip-200] import-route direct
# Configure RIP-2 on CE4.
[CE4] rip 100
[CE4-rip-100] version 2
[CE4-rip-100] network 172.17.0.0
[CE4-rip-100] network 192.168.2.0
[CE4-rip-100] import-route direct
# Import RIP routes on the MCE.
[MCE] ospf 100
[MCE-ospf-100] import-route rip 100
[MCE-ospf-100] quit
[MCE] ospf 200
[MCE-ospf-200] import-route rip 200
5. Verify the configuration.
# After the configuration, run the display ip routing-table vpn-instance command on the
MCE, and you can view the routes to the local VPN.
Take vpnb as an example:
[MCE] display ip routing-table vpn-instance vpnb
Route Flags: R - relay, D - download to fib
------------------------------------------------------------------------------
Routing Tables: vpnb
Destinations : 7 Routes : 7
Destination/Mask Proto Pre Cost Flags NextHop Interface
172.16.0.0/16 Direct 0 0 D 172.16.1.2 Vlanif10
172.16.1.1/32 Direct 0 0 D 172.16.1.1 Vlanif10
172.16.1.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
172.18.0.0/16 Direct 0 0 D 172.18.1.2 Vlanif30
172.18.1.1/32 Direct 0 0 D 172.18.1.1 Vlanif30
172.18.1.2/32 Direct 0 0 D 127.0.0.1 InLoopBack0
192.168.0.0/16 RIP 100 1 D 172.16.1.1 Vlanif10
# Run the display ip routing-table vpn-instance command on the PE, and you can view
the routes to the local VPN.
Take vpnb on PE2 as an example:
Huawei AR1200 Series Enterprise Routers
Configuration Guide - VPN 2 MCE Configuration
Issue 01 (2012-04-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
57

Table of Contents

Other manuals for Huawei AR1200 Series

Related product manuals