Figure 3-112 Installing a fastener
Step 7 Place the water detection cable onto the fasteners, secure the fasteners, and keep
the water detection cable in close contact with the oor, as shown in Figure
3-113.
Figure 3-113 Securing a water detection cable
If multiple water detection cables need to be connected in series, connect the male
connector of one cable to the female connector of another cable.
----End
FusionModule2000-S Smart Modular Data Center
User Manual 3 Hardware Installation
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 118
To Next Page
Loading...
Need help?
General