Parameter Description
Remember
password
If you select this option, the password of the user used for the last
login is saved.
Forgot
password
If you have bound your account to an email address, you can
retrieve your password using your email address.
For details about how to bind your email address, see
Comprehensive Services > Authority Management > Adding a
User in iClient S100 User Manual.
For details about how to
congure the mailbox parameters, see
FAQs > Comprehensive Services > Basic Management > How
Can I Congure Support for Sending Emails? in iClient S100
User Manual.
Port Port number
NOTE
The default values of Web Port and Adms Port are 8098 and 8088
respectively.
If the ports are occupied, manually change the port number. Use a port
number that is not in use and that is not the database port number 5442
or Redis port number 6390, 21, or 80.
S100
Server IP
● Server+client installation:
– If a local server is used, the server IP address is the local IP
address 127.0.0.1.
– If you want to log in to another server, enter the IP address
of the PC where the server is located.
● Client installation:
Enter the IP address of the PC where the server to be
connected is located.
CAUTION
Ensure that the PC where the iClient S100 server is installed is started
and the network is normal. Otherwise, service operations on the client
that logs in to the server may fail.
Step 13 On the iClient S100 home page, choose Maintenance Management > Video
Device > Device List.
Step 14 Click Add in the upper right corner. You can select IP Access or Search Access.
The following table describes the parameters on the page of adding a device.
Table 5-43 Adding a device
Parameter/Button
Description
Device Type Species the type of the device to add (IVS1800).
Name Species the device name.
Address Species the device address. The format is
xxx.xxx.xxx.xxx, for example, 192.168.1.10.
FusionModule2000-S Smart Modular Data Center
User Manual 5 Power-On Commissioning
Issue 07 (2022-09-30) Copyright © Huawei Technologies Co., Ltd. 243