– After the rst login, change the password in time to ensure account security and
prevent unauthorized network attacks, such as data tampering. Huawei will not be
liable for any security issues caused by your failure to change the preset password
in time or password loss after changing.
– Change the password of the user account periodically.
– Record and keep the password properly. If you forgot the password, you will be
unable to log in to the WebUI.
– When the event
notication is congured and the password retrieval mode is
congured under user management, the password can be retrieved.
– An account is logged out due to timeout if no operation is performed within 10
minutes after system login.
– A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
----End
5.3.2 Preparations and App Login
Prerequisites
App operating environment requirements:
● The mobile device must run Android 4.0 or later and is not root operating
system (the operating system is not
ashed).
● The mobile device has sucient battery reserve.
● You have obtained the IP address of the ECC800-Pro as well as the user name
and password used for WebUI login.
● A PC with an IP address in the same network segment as that of the ECC800-
Pro is prepared, and the PC has connected to port WAN1 on the ECC800-Pro.
Procedure
Step 1 Download and obtain the app installation package using any of the following
three methods:
● Log in to Huawei AppGallery (https://a.vmall.com/), search for
FusionModule, and tap Download.
a. (Optional) Set the pad language to English.
b. Open the browser on the pad, enter www.baidu.com in the address box,
search for Huawei AppGallery, select Ordinary Download, and tap
Save.
c. Install the Huawei AppGallery. If the downloaded
le exists in the drop-
down list box, tap the le to install the Huawei AppGallery. If the
downloaded
le does not exist in the drop-down list box, choose File >
Local on the desktop, nd the Download folder, and tap the Huawei
AppGallery installation package.
FusionModule800 Smart Small Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. 271
To Next Page
Loading...
Need help?
General