About This Document
Purpose
This document describes how to install and connect cabinets, devices, pipes, and
cables for the FusionModule800 Smart Small Data Center (smart module for
short), and how to commission, operate, and maintain the product, providing
operation guidance and technical support for onsite installation personnel and
technical support engineers.
Intended Audience
This document is intended for:
● Hardware installation engineers
● Technical support engineers
● Commissioning engineers
● Maintenance engineers
Symbol Conventions
The symbols that may be found in this document are
dened as follows.
Symbol
Description
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.
FusionModule800 Smart Small Data Center
User Manual About This Document
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. ii
To Next Page
Loading...
Need help?
General