Figure 5-71 Server Recording Plan
4. Congure a server recording plan.
If you set the recording plan policy to All, you do not need to set the recording plan time.
5. Click Save.
----End
5.3.12 Linkage Control
Prerequisites
● You have obtained the IP address of the ECC800-Pro as well as the user name
and password used for WebUI login.
● A PC with an IP address in the same network segment as that of the ECC800-
Pro is prepared, and the PC has connected to port WAN_1 on the ECC800-Pro.
● Ensure that Enable linkage control function is Yes.
FusionModule800 Smart Small Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. 332
To Next Page
Loading...
Need help?
General