Huawei FusionModule800 User Manual

● Performance data statistics: You can view historical data of devices to help
analyze data or problems.
● Operation log: You can view logs of key operations, such as user login,
parameter modication, data export, device upgrade, and access control
events.
● Data export: You can export historical data of the ECC800-Pro and some
southbound devices.
3.4.2.5 Linkage Control
● Supports the linkage logic of aisle smoke alarms or high temperature alarms.
By default, the IT cabinet doors are opened through linkage by default.
NO TE
The aisle smoke sensor alarm cannot trigger the customer's re extinguishing system. Only
dry contact alarm signals are provided.
● If the protected area of the re extinguishing system is in the smart module,
when a smoke alarm is generated, the door of the linked cabinet is not
opened. If the door is opened, an alarm (door status alarm) is generated.
● If the protected area of the
re extinguishing system is outside the smart
module, when a smoke alarm is generated, key hardware devices on the rear
door of the linked cabinet are opened.
3.4.3 Key Hardware Devices
3.4.3.1 ECC800-Pro
3.4.3.1.1 Product Conguration
The ECC800-Pro data center controller is used to monitor the devices and
environment in the smart module. It consists of the power module and main
control module. You can insert and remove the power module.
Figure 3-24 ECC800-Pro
(1) Power module
(2) Main control module
Table 3-15 ECC800-Pro environmental specications
Item
Specications
Operating
temperature
–20°C to +50°C
FusionModule800 Smart Small Data Center
User Manual 3 System Architecture
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. 45

Huawei FusionModule800 Specifications

General

Brand	Huawei
Model	FusionModule800
Category	Storage
Language	English