If longer-time video storage is required, set camera parameters according to the following
table.
Table 5-23 Camera conguration parameters
Condition Result
Encoding
Protocol
Resolutio
n
Frame
Rate
I-Frame
Interval
Minimum
Bit Rate
Required
Supporte
d Video
Storage
Duration
(h)
H.265 1080P 25 50 1 Mbit/s 66
H.264 1080P 25 50 1 Mbit/s 66
H.265 720P 25 50 0.8 Mbit/s 75
H.264 720P 25 50 1 Mbit/s 66
H.265 720P 25 50 0.6 Mbit/s 105
H.264 720P 25 50 0.8 Mbit/s 75
5. Choose Settings > Intelligent Analysis > Common Intelligence. Select
Enable, click Add, add motion detection areas, set motion detection
parameters, and click Save.
6. Set the deployment policy.
Figure 5-31 Setting the deployment policy
7. Set the alarm linkage policy.
FusionModule800 Smart Small Data Center
User Manual 5 Power-On Commissioning
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. 303
To Next Page
Loading...
