● Material: A spare indicator of the same model is available and functional.
Procedure
Step 1 Open the rear door of the Converged Cabinet, and push out the fuse terminal
block to disconnect the circuit. For details about the fuse position and how to
remove the fuse, see 6.4.2.2 Replacing a Fuse.
Step 2 (Optional) Open the front door of the Converged Cabinet, and remove the
indicator protective panel.
Figure 6-7 Removing the indicator protective panel
Step 3 Loosen the screw at the back of the indicator using a Phillips screwdriver, and
remove the cables.
When removing cables, label the cables with corresponding terminal ports for later connection.
FusionModule800 Smart Small Data Center
User Manual 6 O&M
Issue 01 (2021-02-05) Copyright © Huawei Technologies Co., Ltd. 404
To Next Page
Loading...
Need help?
General