N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7.27 Installing a CPU
This topic describes how to install a CPU.
7.28 Removing a DIMM
This topic describes how to remove a dual in-line memory module (DIMM) before replacing
it with a new one.
7.29 Installing a DIMM
This topic describes how to install a dual in-line memory module (DIMM) for a Appliance.
7.30 Removing the Mainboard
This topic describes how to remove the mainboard before replacing it with a new one.
7.31 Installing the Mainboard
This topic describes how to install the mainboard.
7.32 Removing a NIC
This topic describes how to remove a network interface card (NIC) before replacing it with a
new one.
7.33 Installing a NIC
This topic describes how to install a network interface card (NIC).
7.34 Removing a SATA DOM
This topic describes how to remove a Serial Advanced Technology Attachment (SATA) Disk
on Module (DOM) before replacing it with a new one.
7.35 Installing a SATA DOM
This topic describes how to install a Serial Advanced Technology Attachment (SATA) Disk on
Module (DOM) to replace the original one.
7.36 Removing an SD Card
This topic describes how to remove a Secure Digital (SD) card before replacing it with a new
one.
7.37 Installing an SD Card
This topic describes how to install an SD card to replace the original one.
7.38 Removing the Front Hard Disk Backplane
This topic describes how to remove the front hard disk backplane before replacing it with a
new one.
7.39 Installing the Front Hard Disk Backplane
This topic describes how to install the front hard disk backplane.
7.40 Removing the Rear Hard Disk Backplane
This topic describes how to remove the rear hard disk backplane before replacing it with a
new one.
7.41 Installing a Rear Hard Disk Backplane