N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 7-14 Connecting power cables to a DC PSU
----End
7.6 Removing the Chassis Cover
This topic describes how to remove the chassis cover from the N2000H V3 before replacing
any N2000H V3 part in the chassis.
Scenarios
Remove the chassis cover from the N2000H V3 before replacing any N2000H V3 part in the
chassis.
Prerequisites
Conditions
You have removed the N2000H V3 before removing its chassis cover. For details, see 2.5
Removing the N2000H V3.
Data
You have obtained the rack number and chassis number of the N2000H V3.
You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools
ESD gloves or ESD wrist strap
To Next Page
Loading...
Need help?
General