Huawei N2000H V3 - 4.4 Configuring the BIOS

N2000H V3 Appliance
User Guide
4 Configuring the N2000H V3
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
76
Figure 4-11 LSISAS3108 controller card
4.4 Configuring the BIOS
This topic describes how to configure the basic input/output system (BIOS) for the N2000H
V3.
Scenarios
Configure the BIOS for the N2000H V3 in remote control mode.
The configuration items are as follows:

Appliance boot mode

Network drive

Preboot execute environment (PXE) on the network interface card (NIC)

Setting the BIOS Password
For details about how to configure the BIOS, see the HUAWEI Appliance Grantley Platform BIOS
Parameter Reference.
Prerequisites
Conditions

The N2000H V3 is powered on.

You have logged in to the iBMC Web. For details, see 7.2 Logging In to the iBMC
WebUI.
Data
None
Workflow
Figure 4-12 shows the process for configuring the BIOS.