N2000H V3 Appliance
User Guide
2 Installing and Removing the N2000H V3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Data
Data preparation is not required for this operation.
Tools
The following tools must be available before the operation:
Protective gloves
Electrostatic discharge (ESD) gloves
ESD wrist strap
Paper knife
Procedure
Step 1 Check whether the packing case and seals are in good condition.
If the packing case is damaged (for example, the packing case is soaked or deformed, or the seals or
pressure sensitive adhesive tape is unsealed), fill in the Cargo Problems Feedback Form.
Step 2
When using a paper knife to unpack a packing case, ensure that the knife edge is of a proper
protrusion to avoid hurting hands or damaging the device in the packing case.
Use a paper knife to cut the pressure sensitive adhesive tape on the packing case, and open the
packing case.
Step 3 Based on Table 2-2, check that the components are intact and free from oxidation, corrosion,
or damage. Ensure that there is no missing part.
Table 2-2 Packing items
Accessary box, containing the product documentation CD-ROM, one
Service CD, Quick Start Guide, and Warranty card.
----End
2.3 Installing the N2000H V3
This topic describes how to install the N2000H V3.
To Next Page
Loading...
Need help?
General