Huawei N2000H V3 - 7.23 RAID Controller Card Installation

N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
181
Figure 7-40 Removing a RAID controller card
Step 5 Place the removed RAID controller card in an ESD bag.
----End
7.23 Installing a RAID Controller Card
This topic describes how to install a RAID controller card. The method for installing the
RAID controller card varies with the RAID controller cards.
Scenarios
Install a RAID controller card in any of the following scenarios:

A RAID controller card fails.

A RAID controller card is to be replaced with a new model.
Prerequisites
Conditions

You have powered off the N2000H V3. For details, see 3.2 Powering Off.

You have removed the chassis cover from the N2000H V3. For details, see 5.6
Removing the Chassis Cover.

You have removed the riser card tray above the RAID controller card. For details, see
5.12 Removing the Riser Card.
Data