Huawei N2000H V3 - 7.29 DIMM Installation

N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
198

You have removed the chassis cover from the N2000H V3. For details, see 5.6
Removing the Chassis Cover.

You have removed the air duct from the N2000H V3. For details, see 5.8 Removing the
Air Duct.
Data

You have determined the position on the N2000H V3 for removing a DIMM.

You have obtained the rack number and chassis number of the N2000H V3, and labeled
its panel to prevent misoperations.
Tools

ESD gloves

Packaging materials, for example, memory riser box
Procedure
Step 1 Open the two fixing clips of the DIMM slot simultaneously. See step (1) in Figure 5-57.
Figure 7-57 Removing a DIMM
Step 2 Remove the DIMM from the slot. See step (2) in Figure 5-57.
Step 3 Place the removed DIMM in memory riser box.
----End
7.29 Installing a DIMM
This topic describes how to install a dual in-line memory module (DIMM) for a Appliance.