N2000H V3 Appliance
User Guide
4 Configuring the N2000H V3
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Specifies the start time from which
deduplication tasks are carried out.
Set Start time to 0:00
so that deduplication
tasks are carried out
when the traffic is
light.
Specifies the duration for which
deduplication tasks keep being carried out.
Set Duration(in
hours) to 6 so that
deduplication tasks
keep being carried out
for six hours.
Create a
second
schedule
for
throughput
optimizati
on
Specifies the days on which deduplication
tasks are carried out.
Select Saturday and
Sunday.
Specifies the start time from which
deduplication tasks are carried out.
Set Start time to8 so
that deduplication
tasks are carried out
from 08:00 in
weekends when the
traffic is light.
Specifies the duration for which
deduplication tasks keep being carried out.
Set Duration(in
hours) to 12 so that
deduplication tasks
keep being carried out
for 12 hours until
20:00.
5. Click OK.
----End
Result
After configuring deduplication, choose Server Manager > File and Storage Services >
Volumes. In the VOLUMES area, Deduplication Rate and Deduplication Savings of the
volume configured with deduplication display the related statistical information.
4.7.3.9 Configuring the iSCSI Target Server
The Internet Small Computer System Interface (iSCSI) technology uses TCP/IP packets and
iSCSI packets to encapsulate SCSI packets. This allows SCSI commands and data to be
transmitted over an ordinary Ethernet. An iSCSI target is a server component of an iSCSI
network. Typically, an iSCSI target is a storage device that is used to store data and receive
and respond to requests from one or multiple clients. To enable clients running iSCSI Initiator
to access the shared space on a server, you must configure and enable the iSCSI target server
feature.
To Next Page
Loading...
