Huawei N2000H V3 - Installing a Pcie Card on the Mainboard

N2000H V3 Appliance
User Guide
7 Replacing Parts
Issue 04 (2018-11-06)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
168
7.15.2 Installing a PCIe Card on the Mainboard
This topic describes how to install a Peripheral Component Interconnect Express (PCIe) card
on the mainboard.
Scenarios
Install a PCIe card to replace the original one.
Prerequisites
Conditions

You have powered off the N2000H V3. For details, see 3.2 Powering Off.

You have removed the chassis cover from the N2000H V3. For details, see 5.6
Removing the Chassis Cover.
Data

You have determined the position on the N2000H V3 for installing a PCIe card.

You have obtained the rack number and chassis number of the N2000H V3.

You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools

ESD gloves

Packaging materials, for example, an ESD bag
Hardware
You have obtained a spare PCIe card.
Procedure
Step 1 Take the spare PCIe card out of the ESD bag.
Step 2 Insert the PCIe card into a PCIe slot. See step (1) in Figure 5-30.
Step 3 Close the latch. See step (2) in Figure 5-30.