N2000H V3 Appliance
User Guide
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
You have obtained the rack number and chassis number of the N2000H V3.
You have located the N2000H V3 based on the preceding information, and labeled its
panel to prevent misoperations.
Tools
ESD gloves or ESD wrist strap
M3 Phillips screwdriver
Packaging materials, for example, an ESD bag
Procedure
Step 1 Remove the USB flash drive from the connector on the mainboard. See Figure 5-35.
Figure 7-35 Removing a USB flash drive
Step 2 Place the removed USB flash drive in an ESD bag.
----End
7.19 Installing a USB Flash Drive in the Chassis
This topic describes how to install a USB flash drive in the chassis.
To Next Page
Loading...
